Fiber

Key features 18 CWDM channels covered in a single OTDR port In-service testing of active networks High-resolution and short dead zones Select favorite or imported channels list

FTBx-740C-DWC TUNABLE OTDR • C-BAND ITU grid channel selection to test through DWDM MUX/DEMUX • In-service testing of active networks • High-resolution and short dead zones • Select favorite or imported channels list • Supports combined DWDM and CWDM modules with FTB-2 Platform • Single-ended construction and troubleshooting solution • Fiber deep and node splitting • CBH Antenna feeds

FTBx-735C Metro/PON FTTx/MDU OTDR OPTIMIZED FOR METRO/CORE AND FTTX/MDU FIBER DEPLOYMENTS AND TROUBLESHOOTING

OPTIMIZED FOR SINGLEMODE ACCESS NETWORK TESTING 1310 nm/1550 nm and 1625 nm live port iOLM-ready for one-touch multiple acquisitions

OTDR for FTTx test challenges within PON networks Access network testing (P2P) Metro links testing (P2P) Live fiber troubleshooting

OTDR for FTTx/MDU test challenges within PON networks Access network testing (P2P) Metro links testing (P2P) Live fiber troubleshooting

OTDR for FTTx last-mile installation and troubleshooting Short access-network testing FTTA fi ber-DAS installations CATV/HFC network testing

DWDM Channel Checker and OTDR

LAN/WAN Access OTDR OPTIMIZED FOR MULTIMODE AND SINGLEMODE ACCESS NETWORK TESTING

Fastest inspection in the industry for both single-fiber and multi-fiber connectors, with the most reliable results. Self-contained, fully automated tool for zero-button testing all day—without the need to recharge batteries or offload results. The FIP-500 was designed with not one, but several innovative image capture techniques. Express zero-button MPO inspection. Leverage the power of automation for a truly zero-button inspection process. Inspecting an MPO-12? Simply insert a connector in the FIP-500 and—in less than 10 seconds—a pass/fail result is automatically obtained and saved without the need for any settings or further manipulation.

• Fiber Certifier OLTS (Loss and ORL) with 7-inch tablet-inspired design
• Certifies two fibers at two wavelengths under 3 seconds
• Built-in Encircled-Flux compliancy as per ANSI/TIA and ISO/IEC
• 100% automated fiber inspection:
• One-step process with pass/fail analysis at both ends of the fiber
• Certifies against multiple industry standards

Distributed PMD Analyzer — FTB-5600

FIP-400B Wireless. Fully automated WiFi enabled Fiber Inspection Probe with embedded analysis.

Is discontinued and replaced by model Maxtester 940

Fiber Inspection Probe

5-star fiber testing made simple for frontline techs

• Make it simpler. Boost your workforce output without increasing headcount
• Do it better. Upskill frontline techs plus a unique 5-star rating scale, to boost work quality
• Do it faster. Speed up service activation, MTTR and time to revenue with leaner MOPs for improved ROI and customer satisfaction
• Do more for less. Bring down OPEX and CAPEX by minimizing cost of ownership without compromising quality
• Get stronger networks. Take control of QoS and gain confidence in your fiber infrastructure ahead of its next evolution

OTDR-Based remote fibertest system Scalable test solution for fiber network monitoring and management, from one stand-alone unit to centrally managed systems with one or hundreds of test ports Continuous 24/7 fiber network monitoring Dark-fiber SLA management

CWDM and DWDM Optical Spectrum Analyzer. Highly accurate, easy-to-use OSA

MPO Optical Loss Test Set (OLTS)

Point-to-Point (P2P) Links, Access and FTTx Network Installation and Troubleshooting

Connected access OTDR  

Connected access OTDR 

Connected metro/PON FTTx/MDU OTDR  

Connected metro/longhaul OTDR  

Single-Ended Dispersion Analyzer (CD/PMD)

Point-to-Point (P2P) Links, Access and FTTx Network Installation and Troubleshooting

Optical test head

OTDR-Based Remote Test Unit

• Bright red laser at 655 nm
• Pulsed and CW
• operation 40 hours of operation (typical)
• Standard AAA alkaline batteries
• Pocket-size pen-style
• design 2.5 mm universal connector
• GP-1008 adaptor from 2,5mm to 1,25mm

No more network outages as a result of fiber detection/identification procedures

The minimized need to access the network helps prevent errors

• Bright red laser at 635 nm
• Pulsed and CW
• operation 50 hours of operation (typical)
• Standard AAA alkaline batteries
• Rugged and weatherproof
• 2.5 mm universal connector
• GP-1008 2.5mm to 1,25mm adaptor

• Induces minimal loss: ≤1 dB
• Fail-safe detection and results
• Detects if a fiber is active or not prior to maintenance
• Locates a particular dark fiber using tone recognition (270 Hz, 1 kHz, 2 kHz)
• Identifies traffic direction on a live fiber
• Displays the power transmitted through the fiber
• Three times faster test time

Optical Light Source SM & MM

Allows you to detect traffic and measure signals anywhere on singlemode fibers without having to disconnect them.

Optical Light Source SM & MM

Optical Power Meter