Chassis & Modules & Controllers

The WF 3169 from WireFlow is a battery monitoring C Series module that includes an ADC and a high voltage input multiplexer. The module can measure up to 24 series-connected cells with a voltage up to 5V per cell.

The WF 3168 from WireFlow is a battery stack monitor and balancing module that includes a high voltage input multiplexer, ADC and balancing switches for each battery cell. The module can measure up to 8 series-connected cells with a voltage up to 15V per cell.

The WF Smartphone Sensor Toolkit for LabVIEW makes it possible to utilize smartphone sensor data in your LabVIEW application. Just start the WireFlow Sensor Toolkit application on your smartphone, connect wirelessly over TCP/IP or plug it into a Windows PC or a NI Real-Time target with a USB cable and start collecting sensor data.

The WF WireQueue MQTT Toolkit is the easy way to connect your devices using the de facto standard protocol for IIoT: MQTT. It is ideally suited to connect LabVIEW devices over local or remote network for robust data acquisition and control purposes. WireQueue MQTT can connect to any standard MQTT message broker on your LAN or in the cloud with the option of using TLS secured communication.

The User Access Toolkit allows an application to easily grant access to specific code in a LabVIEW application, depending on the currently active user. It supports user interactive authentication as well as by security tokens, i.e. login dialog, WF dongle (WF 2007 or WF 2008) or the WF Fingerprint reader (WF 2111).

The WF 2111 from WireFlow is a USB fingerprint reader specifically made for LabVIEW applications. The CMOS  sensor delivers superior image quality with 256 gray scale values in every single programmable pixel. The fingerprint reader comes shipped with LabVIEW VI:s for capturing images and state-of-the-art biometric algorithms for enrolment and identification.

The WF 2111 from WireFlow is a USB fingerprint reader specifically made for LabVIEW applications. The CMOS  sensor delivers superior image quality with 256 gray scale values in every single programmable pixel. The fingerprint reader comes shipped with LabVIEW VI:s for capturing images and state-of-the-art biometric algorithms for enrolment and identification.

The WF 2008 from WireFlow is a USB security dongle for all LabVIEW  (Windows/ Mac/Linux) targets with access to an USB port. The dongle may be used to protect LabVIEW based systems from being duplicated without permission, to unlock features in the software etc.

The WF Security Suite Programming Application from WireFlow is an intuitive PC application used to manage WireFlow’s Security Dongles for LabVIEW. The keys and data fields of the secure memory inside the dongles can easily be programmed. The functions to load and save entire dongle setups from/to file makes the application effective for both lab development as well as for programming dongles in volume production.

The WF 2007 from WireFlow is a USB Security dongle for all LabVIEW RT/FPGA targets with access to an USB port. It  may be used to protect LabVIEW based systems from being duplicated without permission, to unlock features in the software etc.

The WF 3132 from WireFlow is a 32-channel Multiplexer/Matrix Switch for Compact RIO and Compact DAQ. It is a general purpose switch that can be used to switch almost any type of signals. The relays have ruthenium sputtered contacts making them ideal for low current switching, but are at the same time capable of switching up to 0.5A.

The WF 3154 from WireFlow is a 4-channel Fault Injection Module for Compact RIO. Each channel has a capacity to handle signals up to 58V/2.5A and provides three solid state relays that can be used to create several electrical fault conditions.

The WF 3144 is a 4-channel, 16-bit, Programmable Resistor Module for Compact RIO.Each channel is galvanically isolated, making it ideal for sensor simulation.The 16-bit resolution is non-linear with finer steps at lower resistance values. It could, for example, be used to emulate a PT100 sensor with a range of 40–180Ω/-150–+200°C with a resolution of 0.1°C.

Invoke builds across different targets and in a user-specified order.

The WireFlow progressbar module is an easy way to add progress bars to an application.

Power Cord, AC, Taiwan, 125VAC, 15A

Thunderbolt 3 Type-C Cable, Passive 40 Gbps, 5A, 0.8m

Power Cord for RMX-4124/5/6/7, AC, Type B to Bare Wire, 2.5m

Power Cord, AC, JAP, 125VAC, 12A

Industrial SD Card, 32GB, -40 to 85C, UHS-I

Industrial SD Card, 16GB, -40 to 85C, UHS-I

Power Cord, AC, IEC C19 to NEMA L6-20P, 2.5m

Power Cord, AC, IEC C19 to NEMA 6-15P, 2.5m

Power Cord, AC, IEC C19 to NEMA 5-15P, 2.5m

Power Cord, AC, IEC C19, Malaysia, Hong Kong, Singapore, Saudi Arabia (16A/250V), 2.5m

Power Cord, AC, IEC C19, Taiwan (16A/125V), 2.5m

Power Cord, AC, IEC 60309 BLUE P+N+E TO NEMA L6-30, 2.5M

Power Cord, AC, IEC 60309 BLUE P+N+E TO IEC 60309 BLUE P+N+E, 2.5M

Power Cord, AC, Three Phase IEC 60309 To IEC 60309, 2.5M

Power Cord, AC, IEC C19 TO TYPE I 2.5M

Power Cord, AC, IEC C19 TO BS1363 2.5M

Power Cord, AC, IEC C19 TO EU (CEE 7/7) 3-Pole 16A 2.5M

Power Cord, AC, IEC C14 To C13, 100-240V, 2.5M, UNIVERSAL 2.5M

Power Cord, AC, IEC C14 To C13, 100-240V, 1.5M, UNIVERSAL 1.5M

Power Cord, AC, IEC C14 To C13, 100-240V, 2.5M

Power Cord, AC, IEC C14 To C13, 100-240V, 2.5M