Default Category

FOCCUS Fiber Optic Swabs are specially designed to clean connectors, sleeves and fusion splice mirrors and v-grooves. The swab heads are made of lint-free materials without binders and other contaminates, so it’s clean the 1st time…every time!

Optical Light Source SM & MM

LAN/WAN Access OTDR OPTIMIZED FOR MULTIMODE AND SINGLEMODE ACCESS NETWORK TESTING

Lynx2 splice-on Connectors FC - ST - LC - SC - MPO multi and single mode

Single-Ended Dispersion Analyzer (CD/PMD)

Optical Light Source SM & MM

No more network outages as a result of fiber detection/identification procedures

The minimized need to access the network helps prevent errors

SONET/SDH, OTN and Ethernet interfaces up to 11.3 Gbit/s Packet synchronization turn-up and troubleshooting (SyncE/1588 PTP) Fibre Channel networks 1x, 2x, 4x, 8x and 10x interfaces. OTN testing (as per ITU-T G.709) bidirectional EtherSAM (ITU-T Y.1564) RFC 2544, multistream. TCP throughput test based on RFC 6349 OTDR: Dynamic range up to either 36 or 39 dB Combined singlemode/multimode wavelengths iOLM-ready: one-touch multiple acquisitions

Optical POWER METER 40 calibrated wavelengths + USB

Hand held Cleaver with off-cut collector and auto-rotating blade

Tool to Remove Cable Jackets and to Open/Score Fiber Tubes

Supports single-pair and bonded ADSL2+ and VDSL2, including vectoring and G.INP, thereby enabling service providers to recover and grow wireline revenues Data testing and Web browser for complete service qualifi cation Ethernet testing for qualifi cation of FTTx services at the customer premises IPTV and VoIP test suites for automated quality of service (QoS) testing

Distributed PMD Analyzer — FTB-5600

FIP-400B Wireless. Fully automated WiFi enabled Fiber Inspection Probe with embedded analysis.

• Bright red laser at 635 nm
• Pulsed and CW
• operation 50 hours of operation (typical)
• Standard AAA alkaline batteries
• Rugged and weatherproof
• 2.5 mm universal connector
• GP-1008 2.5mm to 1,25mm adaptor

• Induces minimal loss: ≤1 dB
• Fail-safe detection and results
• Detects if a fiber is active or not prior to maintenance
• Locates a particular dark fiber using tone recognition (270 Hz, 1 kHz, 2 kHz)
• Identifies traffic direction on a live fiber
• Displays the power transmitted through the fiber
• Three times faster test time

OPTICAL, ETHERNET AND MULTISERVICE TESTER

Optical POWER METER 10 calibrated wavelengths

Hand held Cleaver with off-cut collector and auto-rotating blade

Is discontinued and replaced by model FC-8R

Easy-to-use, multitechnology protocol analyzer software for Ethernet-based interfaces.

PMD AND CD ANALYZERS

Fiber Inspection Probe

• Bright red laser at 655 nm
• Pulsed and CW
• operation 40 hours of operation (typical)
• Standard AAA alkaline batteries
• Pocket-size pen-style
• design 2.5 mm universal connector
• GP-1008 adaptor from 2,5mm to 1,25mm

Allows you to detect traffic and measure signals anywhere on singlemode fibers without having to disconnect them.

5-star fiber testing made simple for frontline techs

• Make it simpler. Boost your workforce output without increasing headcount
• Do it better. Upskill frontline techs plus a unique 5-star rating scale, to boost work quality
• Do it faster. Speed up service activation, MTTR and time to revenue with leaner MOPs for improved ROI and customer satisfaction
• Do more for less. Bring down OPEX and CAPEX by minimizing cost of ownership without compromising quality
• Get stronger networks. Take control of QoS and gain confidence in your fiber infrastructure ahead of its next evolution

The FTB-720 model combines singlemode and multimode functionalities

Simple, accurate Optical Power meter (5 calibrated wavelengths)

OTDR-Based remote fibertest system Scalable test solution for fiber network monitoring and management, from one stand-alone unit to centrally managed systems with one or hundreds of test ports Continuous 24/7 fiber network monitoring Dark-fiber SLA management