Description
Passive oscilloscope probes
Our ergonomically designed passive oscilloscope probes are suitable for use with all major brands of oscilloscopes as well as the PicoScope range of USB Oscilloscopes. Passive probes don't require a power supply or batteries so are lightweight and easily portable.
Read our free guide: How to Tune x10 Oscilloscope Probes.
Passive oscilloscope probe: 500 MHz 2.5 mm high-impedance 10:1, BNC
The TA133 is a high-impedance passive probe with 500 MHz bandwidth. It is designed for use with oscilloscopes with a 1 MΩ input impedance and has a fixed attenuation of 10:1. The TA133 has been compensated to ensure optimal performance with the PicoScope 6404 oscilloscopes.
The compact design of this high-performance probe means there is only 2.5 mm housing diameter at the probe tip compared to the conventional 5 mm housing, making it easier to see the device under test and making it ideal for measurements of SMT components.
Each TA133 probe is supplied with the following accessories and spares:
- 1 x Coding rings (set) 3x4 colours
- 1 x Ground blade 2.5
- 1 x Ground lead 15 cm
- 1 x Ground spring 2.5
- 1 x IC-Cap 2.5 0.5 mm pitch; green
- 1 x IC-Cap 2.5 0.65 mm pitch; blue
- 1 x IC Cap 2.5 0.8 mm pitch; grey
- 1 x IC Cap 2.5 1.0 mm pitch; brown
- 1 x IC Cap 2.5 1.27 mm pitch; black
- 1 x Insulating cap
- 2 x Self-adhesive Cu pad 2 x 2 cm
- 1 x Solid tip CuBe 0.5 mm
- 1 x Spring tip gold plated 0.5 mm
- 1 x Sprung hook
- 1 x Trim tool
- 1 x PCB adaptor kit