Products

Calnex's Portable Reference locks to a GPS signal and provides a stable Frequency reference and an accurate Timing reference.

IMS - LANTIME M3000: Time and Frequency Synchronization Platform in 3U Rackmount-Enclosure

IMS - Lantime Time- and Frequency Synchronization System for Industrial Applications in DIN Rail Chassis

The full-featured DIN railmount package has one power supply slot, a clock module slot, a CPU slot and two slots for additional input and output modules. Both, wide range AC and a 20-72 VDC power supply model are available.

LANTIME M600: High EndNTP Server in 1U Case for Server Rackmount

NI PXI-6683H GPS,IRIG-B, IEEE 1588 Sync and Time Module with TCXO

LANTIME M300: NTP Server in 1U Case for Server Rackmount with the DCF77 time code transmitter as reference

Capacitive coupling clamp IEC/EN61000-4-4 ed3

NI PXI-6683 GPS, IRIG-B, IEEE 1588 Sync and Time Module with TCXO

LANTIME M300: NTP Server in 1U Case for Server Rackmount with GPS as reference.

1588 and CES Performance Summary Prove SyncE Jitter and Wander to G.8262 MTIE/TDEV Pass/Fail evaluation One-box testing for Master Clock, Slave Clock, Boundary Clock and Transparent Clock devices

SecureSync® combines Spectracom’s precision master clock technology and secure network-centric approach with a compact modular hardware design in a 1RU chassis to bring you a powerful, scalable and flexible time server. It supports a wide variety of network synchronization and management protocols.

NI PXIe-6674T Timing and Synchronization Module with OCXO

LANTIME M200: NTP Server in 1U Case for Server Rackmount

test multiple Slave and Boundary Clocks simultaneously Paragon-t is used to measure the performance of multiple Boundary Clocks or Slave clocks at the same time

The Model 8230 is a high gain (40 dB) GNSS outdoor antenna covering GPS L1 and GLONASS L1. It uses a three stage low noise amplifier, a mid-section SAW, and a tight pre-filter to protect against saturation by high level sub-harmonics and L-band signals.

NI PXIe-6672 Timing and Synchronization Module with TCXO

LANTIME M200: NTP Server in 1U Case for Server Rackmount with GPS as reference.

Prove Ethernet Sync to 100GbE

Geo-PNT is an innovative and efficient solution for applications that need precise navigation data, as well as accurate time reference. It combines a high performance, versatile, GPS master clock with an accurate inertial navigation system that delivers time,position and attitude under all circumstances, including temporary loss of GPS, typical of dynamic platforms.

LANTIME M100: NTP Server in DIN Rail case

Affordable, fully-integrated GPS-aided inertial navigation system. Geo-iNAV™ is offered in several configurations designed to meet a wide range of inertial navigation application requirements. Configurations are available for both commercial and military applications.

LANTIME M100: NTP Server in DIN Rail case

ITU-T G.8272 Primary Reference Time Clock Stratum 1 Primary Reference Source for GPS and GLONASS Expandable system supporting a total capacity of more than 3,000 remote PTP slaves Full redundancy for every module and function Compliant with ITU-T G.8265.1 Telecom Profile Supports Synchronous Ethernet and optional NTP server Intuitive graphical user interface enabling full management via SNMP and TL1

The GPS Antenna Surge Protector, Model 8226, protects the receiver from damaging voltages that could affect the antenna coax. Voltages exceeding the impulse suppressor trip point are shunted to the system ground. The GPS Antenna Surge Protector is designed to withstand multiple surges and is supplied with a mounting bracket.

Telecom GNSS: GPS, GLONASS or GPS+GLONASS Auxiliary Input: 1PPS, 5 MHz, 10 MHz, 2.048 MHz or 2.048 Mbit/s (SW-selectable) 8 x Sync outputs at choice (E1, 2.048MHz, 10 MHz 4x or 1PPS 4x) Holdover: Std OCXO 1x10-10/day or option rubidium 5x10-11/month SNMP and/or SyncView Plus Remote management via Ethernet (RJ45) TOD over RS232 (NMEA0183) or NTP server (option) Local management via RS-232C

10/25/40 GbE High Performance PTP Grandmaster, NTP Server and Network Sync Monitor All-in-one

LANTIME M600/mrs/3GE: High EndNTP Server in 1U Case for Server Rackmount

GPS-12R/HS Portable GPS-controlled Frequency Standards

GPS-controlled frequency standard, OCXO, 5x10 MHz, 1x5MHz, 1x1pps outputs

GPS-controlled frequency standard, Rubidium, 5x10 MHz, 1x 5MHz, 1x1pps outputs