Fiber

The highest quality premoistened lens-grade tissue for cleaning optical surfaces. Quickly removes dust, oils and contaminants. Compatible with most plastics, glass and metals. Mild cleaning solution, nonabrasive wipe.

Applications:

• Safely cleans and polishes optical surfaces, 
• lenses, 
• photographic equipment, 
• instruments. 

Comes in a pack of 50 single pack presaturated pads.

FTBx-740C-DWC TUNABLE OTDR • C-BAND ITU grid channel selection to test through DWDM MUX/DEMUX • In-service testing of active networks • High-resolution and short dead zones • Select favorite or imported channels list • Supports combined DWDM and CWDM modules with FTB-2 Platform • Single-ended construction and troubleshooting solution • Fiber deep and node splitting • CBH Antenna feeds

T-71M ribbon splicer from 1 to 12 fibers

Is discontinued and replaced by model T-72M12

FTTx Kit 3 Fiber Blowing the EZ way.

The Zeitler extended FTTx Kit 3 contains all parts needed for blowing fiber optic cables, including the EZ.Speedy feeding tool, EZ.Booster compressed air booster unit and the EZ.Easyglide Cable Lubricator.

Cable diameters of Ø 0.5 mm to 8.0 mm into microducts of Ø 6, 7, 8, 10, 12 and 14 mm packed in a single compact heavy duty case.

Hand Drill driven cable insertion with the EZ.Speedy, connect your compressor to the EZ.Booster unit and lubricate the feeded cable with water-based lubricant Bluegliss blow the cable into the duct.

Fiber Optic Cable Blowing made easy!

General purpose, presaturated lint-free cleaning wipe. Contains ultra-pure blend of 91% IPA/9% deionized water. Quickly removes dust, oils and contaminants.

• Ideal for cleaning fiber optic connectors 
• Cleans dirt, oils, and particles 

1 box of 50 single pack presaturated pads

FTBx-735C Metro/PON FTTx/MDU OTDR OPTIMIZED FOR METRO/CORE AND FTTX/MDU FIBER DEPLOYMENTS AND TROUBLESHOOTING

FTTx Kit 1 Fiber Blowing the EZ way.

The Zeitler FTTx Kit 1 contains everything you need for blowing fiber optic cables.

Cable diameters of Ø 0.5 mm to 8.0 mm into microducts of Ø 6, 7, 8, 10, 12 and 14 mm packed in a single compact heavy duty case.

Hand Drill driven cable insertion into the EZ.Speedy, connect your compressor to the EZ.Booster unit and blow the cable into the ducts.

Fiber Optic Cable Blowing made easy!

All the cleaning supplies necessary for a successful installation of 2.5mm fiber optic connections in one convenient kit. Electro-Wash® PX Precision Fiber Optic Cleaner and QbE® Cleaning System are included for performing Combination Cleaning.

Contents:

•  QbE (1 pc), 
• Electro-Wash PX aerosol cleaner (1 pc), 
• 2.5mm swabs (1 tube of 50 pcs), 
• V-Groove and Ferrule Cleaning Swabs (1 tube of 50 pcs), 
• Fusion Splice Mirror Cleaning Swabs (1 tube of 15 pcs), 
• 10cm x 10cm wipes (1 bag of 100 pcs).

OPTIMIZED FOR SINGLEMODE ACCESS NETWORK TESTING 1310 nm/1550 nm and 1625 nm live port iOLM-ready for one-touch multiple acquisitions

Automatic Adaptive Core fusion splicer
Fast, Capable, Practical

FTTx Kit 2 (Blowing, divisible).

FTTx Kit 2 contains everything you need for gentle, even blowing of fiber optic cables (Ø 0.5 mm to 8.0 mm) into microducts (Ø 4, 5, 6, 7, 8, 10, 12, 14 or 16 mm):

• EZ.SPEEDY (pusher) for the selected cable dimension, including the required assembly tool and coupling piece
• EZ.SPLIT (splittableblowing unit) for the corresponding cable dimension
• EZ.SPEEDY Mounting block to securely attach the devices to a tripod or workbench

All in a heavy duty Kit-carry-case, where additional accessories and upgrade-sets for further cable and duct dimensions find a save place.

The Clear connection tool (CCT) has an easy to use mechanism that advances fabric over a cleaning tip with just a short push and click of the tool. Using the CCT with the FOCCUS MX Precision Cleaning Pen provides for fast, easy and repeatable Combination Cleaning™.

• Optimal for MPO Connectors
• Cleans connectors on back plane and on jumpers 
• Uses Combination Cleaning™ process for first time cleaning, every time 
• Effective for the widest range of contaminants 
• Easy to use for quick and reliable cleaning 
• Rugged and durable, great for all work sites 
• Up to 800 cleanings"

OTDR for FTTx test challenges within PON networks Access network testing (P2P) Metro links testing (P2P) Live fiber troubleshooting

The Pull Line Blower EZ50 by Zeitler is used to feed a special pull line promptly and efficiently into conduits of Ø 18 to 50 mm (internal diameter) for electrical installation in private construction.

"The Clear connection tool (CCT) has an easy to use mechanism that advances fabric over a cleaning tip with just a short push and click of the tool. Using the CCT with the FOCCUS MX Precision Cleaning Pen provides for fast, easy and repeatable Combination Cleaning™.

• Optimal for FC, SC and ST Connectors
• Cleans connectors on back plane and on jumpers 
• Uses Combination Cleaning™ process for first time cleaning, every time 
• Effective for the widest range of contaminants 
• Easy to use for quick and reliable cleaning 
• Rugged and durable, great for all work sites 
• Up to 800 cleanings"

OTDR for FTTx/MDU test challenges within PON networks Access network testing (P2P) Metro links testing (P2P) Live fiber troubleshooting

The Zeitler Pull Line Blower EZ300 needs no electrical connection.

The strong fuel engine feeds the pull line independent of power supply.

The EZ300 is used for network construction in civil engineering, ground work, roads, tunnels, bridges, snow cannons and cable car construction. It is suitable for cable ducts Ø 25 to 200 mm (internal diameter)

Water, small residues, impurities or else can often be pushed through with the shuttle in only one operation.

The Clear connection tool (CCT) has an easy to use mechanism that advances fabric over a cleaning tip with just a short push and click of the tool. Using the CCT with the FOCCUS MX Precision Cleaning Pen provides for fast, easy and repeatable Combination Cleaning™.

• Optimal for LC and MU Connectors
• Cleans connectors on back plane and on jumpers 
• Uses Combination Cleaning™ process for first time cleaning, every time 
• Effective for the widest range of contaminants 
• Easy to use for quick and reliable cleaning 
• Rugged and durable, great for all work sites 
• Up to 800 cleanings

OTDR for FTTx last-mile installation and troubleshooting Short access-network testing FTTA fi ber-DAS installations CATV/HFC network testing

Zeitler EZ15 Pull Line Blower for microducts (ø 4-20 mm).

Complete set in strong plastic case including the following accessories:

• 5 tube couplings for outer diameters 6, 8, 10, 12 and 14 mm
• 1 tube reductor 8 to 7mm 1 compressed air hose (3 m length)
• 1 universal hose attachement (for internal diameter 13 -20 mm)
• 1 T-fitting (to take off the top of the cylinder to refill pull line roll)
• 1 box with spare parts and sissors 4 special pull line rolls ( Ø 1 mm, tensile strength approx. 24 kg, roll approx. 900 m)
• 1 manual

See the Zeitler EZ15 in action on Youtube

Made from hydro-entangled 45/55 cellulose/polyester blend for optimum purity in a nonwoven wipe.

Dimensions: 4” x 4” (10.2cm x 10.2cm)

Applications:

• End face cleaning
• Fusion splice preparation 
• Buffer gel removal 

Comes in a bag of 100 wipes.

OTDR for Access network construction Private networks Central office (CO) link certification

fiber preparation tool kit ( roll up )

The Pull Line Blower EZ100 by Zeitler has been developed especially for network construction such as civil engineering, ground work, roads, tunnels, bridges, etc.

It is suitable for cable ducts from Ø 50 to 150 mm (internal diameter).

The pull line might be blown or aspirated. Water, small residues, impurities or else can often be pushed through with the shuttle in only one operation.