Hand held Cleaver with off-cut collector and auto-rotating blade
Optical Connector Cleaner NEOCLEAN® wipes away contaminants from optical connector end face with ease. Just as with our previous products, the cleaning tape does not produce dust, and provides special cleaning strength while resisting foreign particles to mix into the tape. The main body also is made from anti-static material.
The tape advance mechanism has been simplified, reducing the number of assembly parts to a minimum resulting in cost reductions for both manufacturing and assembly.
Extra-strength universal cleaner and degreaser safe for use on plastics.
Comes in 1 can 5oz / 141g trigger aerosol
Made from hydro-entangled 45/55 cellulose/polyester blend for optimum purity in a nonwoven wipe.
Dimensions: 4” x 4” (10.2cm x 10.2cm)
Applications:
Comes in a bag of 100 wipes.
OTDR-Based remote fibertest system Scalable test solution for fiber network monitoring and management, from one stand-alone unit to centrally managed systems with one or hundreds of test ports Continuous 24/7 fiber network monitoring Dark-fiber SLA management
The NEOCLEAN® stick is made with antistatic materials enabling it to control the generation of static electricity during the cleaning process. And just as with the reel type, the cloth in the cleaning part is made from special cleaning fiber.
Useful for cleaning connector end face inserted into adaptors and housings
The NEOCLEAN® stick is made with antistatic materials enabling it to control the generation of static electricity during the cleaning process. And just as with the reel type, the cloth in the cleaning part is made from special cleaning fiber.
Useful for cleaning connector end face inserted into adaptors and housings
The Zeitler Pull Line Blower EZ300 needs no electrical connection.
The strong fuel engine feeds the pull line independent of power supply.
The EZ300 is used for network construction in civil engineering, ground work, roads, tunnels, bridges, snow cannons and cable car construction. It is suitable for cable ducts Ø 25 to 200 mm (internal diameter)
Water, small residues, impurities or else can often be pushed through with the shuttle in only one operation.
The Pull Line Blower EZ100 by Zeitler has been developed especially for network construction such as civil engineering, ground work, roads, tunnels, bridges, etc.
It is suitable for cable ducts from Ø 50 to 150 mm (internal diameter).
The pull line might be blown or aspirated. Water, small residues, impurities or else can often be pushed through with the shuttle in only one operation.
Latest generation of SSU with 6U, 19” or ETSI shelves Intuitive and modular architecture adapted to all telecom node sizes Up to 200 protected (1:1) E1/2.048MHz outputs Expandable System to provide up to 1000 protected outputs (1:1) G.811 PRC with optional dual GPS and/or GLONASS cards and G.812 Type I, II or III SSU holdovers Universal Output & Input card design Fully manageable with intuitive Local and Remote Graphical User Interface Optional NTP and PTP modules 1:1 Protection for every card and function
Unique design for Master, Expansion and Remote shelves Intuitive and modular architecture adapted to all control office sizes Up to 60 protected (1:1) outputs with 3U shelf and up to 200 protected (1:1) outputs with 6U shelf Expandable System to provide up to 1000 protected outputs Stratum 1 PRS with optional GPS card(s) Choice of Stratum 2 or Stratum 3E holdovers Universal input & output Card design SSM on complete system (Master, Expansion, Remote) TL1 manageable with Local and Remote intuitive Graphical User Interface Optional NTP and PTP modules NEBS level 3