WS-5
JON-WS-5
JON-WS-5
ZEI-FTTx-KIT-2
FTTx Kit 2 (Blowing, divisible).
FTTx Kit 2 contains everything you need for gentle, even blowing of fiber optic cables (Ø 0.5 mm to 8.0 mm) into microducts (Ø 4, 5, 6, 7, 8, 10, 12, 14 or 16 mm):
All in a heavy duty Kit-carry-case, where additional accessories and upgrade-sets for further cable and duct dimensions find a save place.
SUM-T72C+
High Definition Core Aligning single fiber fusion splicer
For high end backbone network
JON-FS-1416
JON-MS-326
ZEI-EZ100
The Pull Line Blower EZ100 by Zeitler has been developed especially for network construction such as civil engineering, ground work, roads, tunnels, bridges, etc.
It is suitable for cable ducts from Ø 50 to 150 mm (internal diameter).
The pull line might be blown or aspirated. Water, small residues, impurities or else can often be pushed through with the shuttle in only one operation.
JON-MS-26
ZEI-FTTx-KIT1
FTTx Kit 1 Fiber Blowing the EZ way.
The Zeitler FTTx Kit 1 contains everything you need for blowing fiber optic cables.
Cable diameters of Ø 0.5 mm to 8.0 mm into microducts of Ø 6, 7, 8, 10, 12 and 14 mm packed in a single compact heavy duty case.
Hand Drill driven cable insertion into the EZ.Speedy, connect your compressor to the EZ.Booster unit and blow the cable into the ducts.
Fiber Optic Cable Blowing made easy!
EXF-OX1
5-star fiber testing made simple for frontline techs
EXF-FiberBasix 50 Handheld Testers
ZEI-FTTx-KIT3
FTTx Kit 3 Fiber Blowing the EZ way.
The Zeitler extended FTTx Kit 3 contains all parts needed for blowing fiber optic cables, including the EZ.Speedy feeding tool, EZ.Booster compressed air booster unit and the EZ.Easyglide Cable Lubricator.
Cable diameters of Ø 0.5 mm to 8.0 mm into microducts of Ø 6, 7, 8, 10, 12 and 14 mm packed in a single compact heavy duty case.
Hand Drill driven cable insertion with the EZ.Speedy, connect your compressor to the EZ.Booster unit and lubricate the feeded cable with water-based lubricant Bluegliss blow the cable into the duct.
Fiber Optic Cable Blowing made easy!
ZEI-EZ300
The Zeitler Pull Line Blower EZ300 needs no electrical connection.
The strong fuel engine feeds the pull line independent of power supply.
The EZ300 is used for network construction in civil engineering, ground work, roads, tunnels, bridges, snow cannons and cable car construction. It is suitable for cable ducts Ø 25 to 200 mm (internal diameter)
Water, small residues, impurities or else can often be pushed through with the shuttle in only one operation.
CHE-CCT-125
The Clear connection tool (CCT) has an easy to use mechanism that advances fabric over a cleaning tip with just a short push and click of the tool. Using the CCT with the FOCCUS MX Precision Cleaning Pen provides for fast, easy and repeatable Combination Cleaning™.
JON-JIC-125
The JIC-125 stripper is designed to strip 250μm buffer coating to expose the 125μm optical fiber in fiber optic cables.
CHE-FSK1000E
Highly effective on single and mass splices.Essential for proper equipment maintenance.
Contents:
JON-CST-1900
JON-MS-306
JON-MS-316
JON-MS-426
ADV-OSA5410/11
ZEI-EZ15
Zeitler EZ15 Pull Line Blower for microducts (ø 4-20 mm).
Complete set in strong plastic case including the following accessories:
JON-JIC-4366
JON-UST-500
NTT-ATC-NE-M1
Instantly clean MPO connectors with a simple push
NTT-ATC-NE-M2
Instantly clean MPO connectors with a simple push