IQxel-M LoRa Test Solution
Test LoRa devices on reliable and consistent performance with LitePoint’s IQxel-M™ LoRa Test Solution, a turnkey solution ready to test LoRa technologies right out of the box.
Test LoRa devices on reliable and consistent performance with LitePoint’s IQxel-M™ LoRa Test Solution, a turnkey solution ready to test LoRa technologies right out of the box.
Xena’s L4-7 test platform is the industry’s easiest to deploy. Here are some examples:
Xena’s L4-7 test platform is used for generating stateful Layer 4-7 Ethernet traffic.
6-port 1Gbps test module Ethernet testing
You’re under increasing pressure to develop and launch high-quality products and ramp up production lines. Choosing EXFO’s solutions for lab and manufacturing testing can help you innovate, develop, troubleshoot and deliver more, better and faster.
IQxel-M™ is a comprehensive, one-box test solution for all your wireless connectivity testing needs
IQxel-M™ is a flexible and comprehensive, one-box test solution for all your WLAN, Bluetooth, IoT and LPWAN connectivity testing needs, including navigation (GPS, GLONASS, Compass/BeiDou) technologies.
Suitable for the lab or manufacturing environment, IQxel-M is ideal for testing mobile or IoT products.
Ethernet up to 10 Gbit/s / SONET/SDH, DSn/PDH, OTN Fibre Channel networks 1x, 2x, 4x, 8x and 10x Packet synchronization (SyncE/1588 PTP) FTTA validation (CPRI and OBSAI) at up to 3.1 Gbit/s ISDN solution for testing and troubleshooting DS1 or E1 primary rate interfaces (PRI) BER testing with pass/fail indicators OTN testing (as per ITU-T G.709) including forward error correction (FEC) Faster Ethernet service activation with bidirectional and one-way delay EtherSAM (ITU-T Y.1564) and RFC 2544 test suites, multiservice traffic generation, Through mode and bit-error-rate (BER) testing True wire-speed, stateful TCP throughput based on RFC 6349 for undisputable Carrier Ethernet OAM testing covering MEF, Y.1731 and 802.1ag standards Full linerate packet capture and advanced fi ltering from 10M to 10G
Ethernet interfaces up to 10G Fibre Channel 1x, 2x, 4x, 8x, 10x and 16x interfaces Comprehensive testing for SONET/SDH, OTNt Dual-port Ethernet testing up to 10 Gigabit Ethernet OTN testing (as per ITU-T G.709) including forward error correction (FEC) Packet synchronization turn-up and troubleshooting (SyncE/1588 PTP) True wire-speed, stateful TCP throughput based on RFC 6349 for undisputable SLA enforcement of Ethernet services
Ethernet 10/100/1000 Base-T , GigE optical and 10 GigE LAN/WAN Fibre Channel networks 1x, 2x, 4x, 8x and 10x interfaces Packet synchronization turn-up and troubleshooting (SyncE/1588 PTP) FTTA validation (CPRI and OBSAI) at up to 3.1 Gbit/s via BER testing Simplified BER testing with pass/fail indicators based on user-defi ned thresholds Faster Ethernet service activation with bidirectional and one-way delay EtherSAM (ITU-T Y.1564) and RFC 2544 test suites multiservice traffic generation, Through mode and bit-error-rate (BER) testing True wire-speed, stateful TCP throughput based on RFC 6349 for undisputable Carrier Ethernet OAM testing covering MEF, Y.1731 and 802.1ag standards Full linerate packet capture and advanced fi ltering from 10M to 10G
10M-to-100G compact multiservice field-test solution requirements of next-generation networks Comprehensive and fully integrated test solution covering Ethernet 10M-to-100G OTN,and SONET/SDH technologies Cost-effective, scalable and future-proof module with CFP and CFP2 transceiver coverage – no hardware upgrade, no return to factory required Packet synchronization turn-up and troubleshooting (SyncE/1588 PTP)
IQgig-UWB™ tester for devices enabled with Ultra-Wideband (UWB) 802.15.4z technology.
IQgig-UWB is the first fully-integrated, one-box test solution for physical-layer testing of devices enabled with Ultra-Wideband (UWB) technology. UWB’s combination of low emitted power (<-41.3d Bm/MHz) and large bandwidth (>500 MHz) makes ideal for a variety of communication and ranging applications.
The IQgig-UWB is ideal for both R&D characterization and high-volume production, making it the perfect platform to enable a cost-effective, seamless transition from the lab to the manufacturing floor.
2016 Promotion. The FTB-1v2/880v2 NetBlazer Series is the industry’s most complete and portable 64K to 10G test solution. Optimize your field technicians’ tasks with simultaneous coverage of legacy and high speed network interfaces.
First Fully Integrated Tester for Wi-Fi 6 and Wi-Fi 6E in the 6 GHz Band
Platform solution for 802.11 a/b/g/n/ 802.11ac and 802.11ax testing in the 2.4 and 5 GHz and 6 GHz bands and the most popular wireless connectivity standards (Bluetooth, Bluetooth 5, Bluetooth 5.1, Bluetooth 5.2, Zigbee, Z-Wave) as well as LPWAN technologies (Sigfox, LoRa).
As the FCC and other international regulatory agencies are working towards opening up the 6 GHz band (5.925-7.125 GHz) for unlicensed use, LitePoint’s new IQxel-MW 7G family of testers is designed to meet the demands of connectivity and cellular technologies testing up to 7.3 GHz.
FTB-635 Wideband copper and dsl test module ADSL2+ and VDSL2 bonding, including vectoring and G.INP, allows service providers to recover and grow wireline revenues IPTV test suite with live video preview Full Web browser for complete service qualifi cation Ethernet interfaces up to 1G for qualifying FTTN services at the customer premises High-performance time and frequency scope for analysis of impulse noises , including a unique impulse duration distribution histogram with cumulative impulse disruption time
ADVANCED COPPER CABLE TESTER SmartR technology automatically identifi es and locates common circuit faults using intuitive graphical displays and plain language High-voltage isolation tests for long wire pairs and power span circuits High-performance time and frequency scope for analysis of impulse noises, including a unique impulse duration distribution histogram with cumulative impulse disruption time Advanced wideband copper test module and built-in optical power meter and VFL—the ideal tool for multiskilled engineers troubleshooting FTTN circuits
Extreme flexibility – multi-port and multi-user Calnex SNE is a highly flexible solution for both network emulation and network simulation. Whether you want to emulate point to point links, simulate complex data-centers with multiple gateways or extract out analytical information on video systems, with the Calnex SNE you can build your network in seconds.
SONET/SDH, OTN and Ethernet interfaces up to 11.3 Gbit/s Packet synchronization turn-up and troubleshooting (SyncE/1588 PTP) Fibre Channel networks 1x, 2x, 4x, 8x and 10x interfaces. OTN testing (as per ITU-T G.709) bidirectional EtherSAM (ITU-T Y.1564) RFC 2544, multistream. TCP throughput test based on RFC 6349