FTTx Kit 3 Fiber Blowing the EZ way.
The Zeitler extended FTTx Kit 3 contains all parts needed for blowing fiber optic cables, including the EZ.Speedy feeding tool, EZ.Booster compressed air booster unit and the EZ.Easyglide Cable Lubricator.
Cable diameters of Ø 0.5 mm to 8.0 mm into microducts of Ø 6, 7, 8, 10, 12 and 14 mm packed in a single compact heavy duty case.
Hand Drill driven cable insertion with the EZ.Speedy, connect your compressor to the EZ.Booster unit and lubricate the feeded cable with water-based lubricant Bluegliss blow the cable into the duct.
Fiber Optic Cable Blowing made easy!
General purpose, presaturated lint-free cleaning wipe. Contains ultra-pure blend of 91% IPA/9% deionized water. Quickly removes dust, oils and contaminants.
1 box of 50 single pack presaturated pads
FTTx Kit 1 Fiber Blowing the EZ way.
The Zeitler FTTx Kit 1 contains everything you need for blowing fiber optic cables.
Cable diameters of Ø 0.5 mm to 8.0 mm into microducts of Ø 6, 7, 8, 10, 12 and 14 mm packed in a single compact heavy duty case.
Hand Drill driven cable insertion into the EZ.Speedy, connect your compressor to the EZ.Booster unit and blow the cable into the ducts.
Fiber Optic Cable Blowing made easy!
All the cleaning supplies necessary for a successful installation of 2.5mm fiber optic connections in one convenient kit. Electro-Wash® PX Precision Fiber Optic Cleaner and QbE® Cleaning System are included for performing Combination Cleaning.
Contents:
Automatic Adaptive Core fusion splicer
Fast, Capable, Practical
FTTx Kit 2 (Blowing, divisible).
FTTx Kit 2 contains everything you need for gentle, even blowing of fiber optic cables (Ø 0.5 mm to 8.0 mm) into microducts (Ø 4, 5, 6, 7, 8, 10, 12, 14 or 16 mm):
All in a heavy duty Kit-carry-case, where additional accessories and upgrade-sets for further cable and duct dimensions find a save place.
The Clear connection tool (CCT) has an easy to use mechanism that advances fabric over a cleaning tip with just a short push and click of the tool. Using the CCT with the FOCCUS MX Precision Cleaning Pen provides for fast, easy and repeatable Combination Cleaning™.
OTDR for FTTx test challenges within PON networks Access network testing (P2P) Metro links testing (P2P) Live fiber troubleshooting
"The Clear connection tool (CCT) has an easy to use mechanism that advances fabric over a cleaning tip with just a short push and click of the tool. Using the CCT with the FOCCUS MX Precision Cleaning Pen provides for fast, easy and repeatable Combination Cleaning™.
OTDR for FTTx/MDU test challenges within PON networks Access network testing (P2P) Metro links testing (P2P) Live fiber troubleshooting
The Zeitler Pull Line Blower EZ300 needs no electrical connection.
The strong fuel engine feeds the pull line independent of power supply.
The EZ300 is used for network construction in civil engineering, ground work, roads, tunnels, bridges, snow cannons and cable car construction. It is suitable for cable ducts Ø 25 to 200 mm (internal diameter)
Water, small residues, impurities or else can often be pushed through with the shuttle in only one operation.
The Clear connection tool (CCT) has an easy to use mechanism that advances fabric over a cleaning tip with just a short push and click of the tool. Using the CCT with the FOCCUS MX Precision Cleaning Pen provides for fast, easy and repeatable Combination Cleaning™.
OTDR for FTTx last-mile installation and troubleshooting Short access-network testing FTTA fi ber-DAS installations CATV/HFC network testing
Zeitler EZ15 Pull Line Blower for microducts (ø 4-20 mm).
Complete set in strong plastic case including the following accessories:
Made from hydro-entangled 45/55 cellulose/polyester blend for optimum purity in a nonwoven wipe.
Dimensions: 4” x 4” (10.2cm x 10.2cm)
Applications:
Comes in a bag of 100 wipes.
OTDR for Access network construction Private networks Central office (CO) link certification
The Pull Line Blower EZ100 by Zeitler has been developed especially for network construction such as civil engineering, ground work, roads, tunnels, bridges, etc.
It is suitable for cable ducts from Ø 50 to 150 mm (internal diameter).
The pull line might be blown or aspirated. Water, small residues, impurities or else can often be pushed through with the shuttle in only one operation.